All Efficient Products AEP solar Water Saver How it Works

(954)474-9350

All Efficient Products, Inc.

Solar Contractor Serving South Florida Communities of

Palm Beach, Broward and Miami Dade

“The use of solar energy offers huge potential for natural resource and climate protection, and for the expansion of renewable energies on the road to a future-oriented energy supply.” - Margareta Wolf

The Water Saver deliver hot water to fixtures quickly without waiting for the water to get hot. Re-circulating systems use a pump to move water from a water heater to the fixtures without wasting the water.

In the Water Saver system, a re-circulating pump rapidly pulls hot water from a water heater while simultaneously sending cooled-off water from the hot water lines back to the water heater to be reheated. In addition to having the convenience of hot water on-demand, the system conserves water and can save energy.

Hot water recirculation systems can be activated by a control or switch.

· Timer Systems automatically turns the pump on at the time you need it the most. These systems ensure that hot water is available at the faucet without any waiting.

· Switch Systems, being a manual system use less energy than timer operated systems,. It allows for less frequent recirculation cycles and hot water constantly being left in the pipes to cool off.

Hot water recirculation systems generally consist of a pump, timer and valve. When the switch or control turns the system on, the pump starts re-circulating cooled water that's been sitting in the hot water line and sends it back to the water heater through the cold water line. When the water reaches a desired temperature a control closes the zone valve and turns off the pump. It is much like turning on the hot water faucet and letting the water run until it gets hot, but instead of the water going down the drain, it is simply returned back to the water heater. When the hot water faucet is turned on, hot water is readily available.

The system is designed to provide hot water at the most distant fixture and every fixture in series or close to the main line. All cold water fixtures still receive cold water, and the system is designed to not allow hot water to enter cold water lines. Only one pump is necessary to supply hot water to any fixture.